Bandsaw Blade for meat bandsaw

Bandsaw Blade Thickness 0.022" (0.5588mm) Bandsaw Blade Depth 5/8" (15.875mm) Bandsaw Blade (TPI) 4 (Mulit-purpose), 3 (fresh meat only) Bandsaw Blade Type Low Waste, High Frequency with hardened teeth Bandsaw Blade Construction high tensile stainless PLEASE NOTE IF YOU DON'T SEE THE SIZE YOU REQUIRE PLEASE CALL OUR SPARES DEPARTMENT FOR A QUOTE ON THE SIZE YOU REQUIRE.

Bandsaw Blades for AEW350 (pack of 10's)

Bandsaw Blade Length 2578mm Bandsaw Blade Thickness 0.022" (0.5588mm) Bandsaw Blade Depth 5/8" (15.875mm) Bandsaw Blade (TPI) 4 (Mulit-purpose) Bandsaw Blade Type Low Waste, High Frequency with hardened teeth Bandsaw Blade Construction high tensile stainless

Blue fitting piece for actuating lever - MS84/MS90/MS100/Classic 96

This blue fitting piece is part of the mechanism that drives the actuating lever, which in turn drives the grid frames. The item is an integral part of the cutting assembly and is designed to wear through time and by doing so prevent wear and tear on more expensive parts of the assembly. The fitting piece is fitted on the blade shaft and is driven by the motor. The fitting piece is made from PAS-LX which requires no lubrication or maintenance and is friction free, this helps prevent heat build up. 

Blue square fitting piece for grid frame mechanism - MS100/120 & Classic 126

This blue plastic fitting piece is located in the grid mechanism and is designed to wear over time, by doing so this prevents wear on other more expensive parts of the grid frame mechanism. The blue plastic fitting piece helps drive the grid frame mechanism and once it has worn down to much can lead to movement in the frames and lead to uneven cutting. The material the blue plastic fitting piece is made from PAS-LX which requires no lubrication and creates no friction which in turn prevents heat build up.

Blue square fitting piece for grid frame mechanism - MS84/MS90/MS100 & Classic 96 dicers

This blue square fitting piece is used as a wear and tear item on the Foodlogistik dicers. PLEASE NOTE: Pricing is for one blue piece, not a pack of three. It is fitted in the grid frame mechanism and helps drive the grids up and down and side to side. It is an essential part of the grid mechanism and is design to wear over time. Once the fitting piece wears it can lead to movement in the grid frames and consequently can cause an uneven cutting action. The item sits on the actuating lever and you need two items per machine. The material used is PAS-LX which requires no lubrication or maintenance and protects all adjacent components from wear and tear. The material used also causes no friction which in time prevents a build up of heat. 

Burger Papers (Box of 45 reams)

SFM stock two main sizes of burger paper, 4.5" (114mm) and 5" (127mm). The burger papers are square in shape and have a 6mm locating hole, ideally located to fix onto automatic burger machines. The burger papers have a thickness of 73gsm which is thicker than most competitors burger papers (usually 55gsm) These burger papers will fit into the Formatic R2200 Burger Machine. The burger papers are sold in boxes of 45 reams, with each ream containing 500 burger papers. So in total one box contains 22500 burger papers.  Our burger papers are suitable for freezing.  IF YOU REQUIRE A DIFFERENT SIZE THEN PLEASE CONTACT OUR SALES DEPARTMENT FOR PRICING AND AVAILABILITY on (0161) 366 1777  

Compressor

External dimensions 680x810x300mm Air receiver size 50 litres Motor 2.5HP (1.8kW) Piston Displacement 11CFM (311 litres/min) Max Free air Delivery (F.A.D) 7CFM (198 litre/min) Max Pressure 145psi (10 bar) Noise Level 96dB (A) Weight 39kg  Receive an additional 20% off this price when purchased with a tray or skin packing machine from our website. Discount will be added automatically at checkout.

Fast Wear Kit for BG & ST

The BG & ST Range fast wear kit has all the blade / wheel scrapers and blade guides required on a Medoc BG Meat Bandsaws and Medoc ST Meat Bandsaws including: 2 x Part No: 35.015 - Top wheel cleaner group 1 x Part No: 35.016 - Bottom wheel cleaner group 2 x Part No: 35.667 - Scraper group 1 x Part No: 36.612 - Nylon blade guide block 2 x Part No: 32.102 - Upper blade guide These parts are also available to purchase on their own (please call our Spares Dept), but a special discount is given for buying the kit online.

Fast Wear Kit for BGR

The BGR Range fast wear kit has all the blade / wheel scrapers and blade guides required on a Medoc BGR Meat Bandsaw including: 2 x Part No: 35.015 - Top wheel cleaner group 1 x Part No: 35.016-I - Bottom wheel cleaner group 2 x Part No: 35.667-I - Scraper group T-shaped 1 x Part No: 36.612 - Nylon blade guide block 2 x Part No: 32.102 - Upper blade guide Please download the Medoc BGR Bandsaw range brochure (top right) to view where these parts fit on the machine. These parts are also available to purchase on their own (please call our Spares Dept), but a special discount is given for buying the complete kit online.

Fast Wear Kit for K430 & K440

The K430/440 bandsaw fast wear kit has all the blade / wheel scrapers and blade guides required on Kolbe K430s & K440 Meat Bandsaws. Please NOTE that the fast wear kit for these bandsaws has changed over of the years depending on the serial number. Please choose the relevant kit for your bandsaws: Serial No. 0 to 99.0199 contains: 1 x Part No: 2562200 - Lower blade guide 3 part with plastic 2 x Part No: 9078151 - Plastic guide 4mm with screws 6 x Part No: 2100872 - Blade & wheel scraper 1 x Part No: 2562440 - Upper blade guide brown polymer Serial No. 99.0200 to 99.0325 contains: 1 x Part No: 2562260 - Lower blade guide short metal 1 x Part No: 2562225 - Lower blade guide long white nylon 6 x Part No: 2100872 - Blade & wheel scraper 1 x Part No: 2562440 - Upper blade guide brown polymer Serial No. 99.0326 to current date: 1 x Part No: 2562446 - Table guide long brown 2 x Part No. 2562455 - Blade guide block 6 x Part No. 2100872 - Blade & Wheel scraper 1 x Part No: 2562440 - Upper blade guide brown polymer These parts are also available to purchase on their own (please call our Spares Dept), but a special discount is given for buying the kit online. 

Fast wear kit for STL

The STL Range fast wear kit has all the blade / wheel scrapers and blade guides required on a Medoc STL Meat Bandsaw including: 2 x Part No: 35.015 - Top wheel cleaner group 1 x Part No: 35.016-I - Bottom wheel cleaner group 2 x Part No: 35.667 - Scraper group T-shaped 1 x Part No: 36.612 - Nylon blade guide block 2 x Part No: 32.102 - Upper blade guide Please download the Medoc STL Bandsaw range brochure (top right) to view where these parts fit on the machine. These parts are also available to purchase on their own (please call our Spares Dept), but a special discount is given for buying the kit online.

Grid blades

These Foodlogistik dicer grid blades are made from high quality stainless steel and are available off the shelf for next day delivery. The Foodlogistik dicer grid blades come in either 1mm or 2mm thickness and with either a smooth or serrated blade type. The 1mm blades are suitable for all standard grid sets, with the smooth version ideal for fresh meat / products and the serrated blades for frozen (up to -3'C) meat / products. The 2mm blades are suitable for specific grid sets made to house 2mm blade sets and again the smooth version for fresh meat / products and the serrated blades for frozen (up to -3'C) meat / products.   The grid blades are essential to the cutting process of the Foodlogistik dicing machines and consequently it is extremely important that they are kept sharp at all times. SFM offer a blade sharpening service for all types of dicing machine blades, and they can be done quickly and efficiently to make sure we reduce the downtime of your machine. SFM do however recommend that customer have two sets of blades for their Foodlogistik dicing machine, so they can send one off for sharpening whilst using the other set is on the machine, making sure you are never without your Foodlogistik dicer. For more information and pricing on the blade sharpening service please call our service department on (0161) 366 1777. The Foodlogistik dicer grid blades work alongside the main sickle blade (slice-cut blade) and these can also be purchase via the website, please click here. SFM can also sharpen these blades as well, giving our customers a fast and efficient service keeping their Foodlogistik dicer working perfectly for as long as possible. 

Meat Twine - Black Elastic - Elastomer 1200m/kg (per box)

Metres on reel before stretching 408m (510m/kg) Metres on reel after stretching 960m (1200m/kg) Thickness before stretching 2.5mm Thickness after stretching 1.5mm Cones per box 24

Meat Twine - Red & White Elastic - Elastomer 1200m/kg (per box)

Metres on reel before stretching 408m (510m/kg) Metres on reel after stretching 960m (1200m/kg) Thickness before stretching 2.5mm Thickness after stretching 1.5mm Cones per box 24

Meat Twine - White Elastic - Elastomer 1200m/kg (per box)

Metres on cone before stretching 408m (510m/kg) Metres on cone after stretching 960m (1200m/kg) Thickness before stretching 2.5mm Thickness after stretching 1.5mm Cones per box 24

Meat Twine - White Thin Elastic - Sprial Twist 1800m/kg (per box)

Metres on reel before stretching 720m (900m/kg) Metres on reel after stretching 1440m (1800m/kg) Thickness before stretching 1.8mm Thickness after stretching 1mm Cones per box 24

No.12 Meat Mincer Plates

Mincer Plate Diameter 70mm Mincer Plate Notches on outside 1 notch Salvador Mincer Plate Construction stainless steel Salvador Mincer Plate Type Long Life with Hub 

No.12 Mincer Knife (to fit 70mm diameter plate)

Mincer Blade Diameter (from tip to tip) 62mm (approx) Mincer Blade Inside Square Measurement (WxD) 11x11mm (approx) Salvador Mincer Blade Edge Type Curved Salvador Mincer Blade Construction Stainless Steel L&W Mincer Blade Edge Type Straight L&W Mincer Blade Construction Tool-steel

No.22 Meat Mincer Plates

Mincer Plate Diameter 83mm Mincer Plate Notches on outside 1 notch Salvador Mincer Plate Construction Stainless steel Salvador Mincer Plate Type standard & Long Life with hub Torrey Mincer Plate Construction Tool-steel Torrey Mincer Plate Type Long Life L&W Mincer Plate Construction tool-steel (standard) & st/st (long life) L&W Mincer Plate Type standard & long life

No.22 Mincer Knife (to fit 83mm diameter plate)

Mincer Blade Diameter (from tip to tip) 72mm (approx) Mincer Blade Inside Square Measurement (WxD) 13x13mm (approx) Salvador Mincer Blade Edge Type Curved Salvador Mincer Blade Construction Stainless Steel L&W Mincer Blade Edge Type Straight L&W Mincer Blade Construction Tool Steel

No.32 Meat Mincer Plates

Mincer Plate Diameter 100mm Mincer Plate Notches on outside 4 notches up to 8mm, 3 notches above 8mm Salvador Mincer Plate Construction stainless steel (standard and long life) Salvador Mincer Plate Type Standard & Long Life Torrey Mincer Plate Construction Tool-steel Torrey Mincer Plate Type Long Life L&W Mincer Plate Construction tool-steel (standard) & st/st (long life) L&W Mincer Plate Type standard and long life

No.32 Mincer Knife (to fit 100mm diameter plate)

Mincer Blade Diameter (from tip to tip) 90mm (approx) Mincer Blade Inside Square Measurement (WxD) 15x15mm (approx) Salvador Mincer Blade Edge Type Curved (Standard) & Straight (Power) Salvador Mincer Blade Construction Stainless Steel L&W Mincer Blade Edge Type Straight (Standard & LL) & Curved (X-Cut) L&W Mincer Blade Construction Tool-steel (Standard & X-Cut) & Stainless Steel (Long Life)  

No.52 (42) Meat Mincer Plates

Mincer Plate Diameter 130mm Mincer Plate Notches on outside 4 notches up to 8mm, 3 notches above 8mm Salvador Mincer Plate Construction stainless steel Salvador Mincer Plate Type long life Torrey Mincer Plate Construction tool-steel Torrey Mincer Plate Type long life L&W Mincer Plate Construction stainless steel L&W Mincer Plate Type long life

No.52 Mincer Knife (to fit 130mm diameter plate)

Mincer Blade Diameter (from tip to tip) 120mm (approx) Mincer Blade Inside Square Measurement (WxD) 21x21mm (approx) Salvador Mincer Blade Edge Type Curved Salvador Mincer Blade Construction Stainless Steel L&W Mincer Blade Edge Type Straight (standard & LL), curved (X-cut) L&W Mincer Blade Construction Tool Steel (standard & X-cut) Stainless Steel (LL)  

R-Series 75 Litre Hopper

This 75 Litre hopper will fit any of the R-series Formatic burger machines. Much larger than the standard 20 litre hopper, this hopper allows bigger batches to be put through the machine and decreases down time when filling up the hopper.  

R-Series Burger Drums

To fit all R2200 burger machines, these burger drums are standard sizes used across the industry. Please note that the 3" (75mm) burger drum is not kept in stock and takes approx 4-6 weeks to produce. The 4" (100mm) and 5" (118mm) are kept in stock ready for next day delivery. Each Formatic burger drum can be adjusted to increase or decrease the depth of the burger, this is adjustable between 5 and 24mm. If you require a thicker burger than 24mm you can buy a 'deep drop' drum which is adjustable between 5 and 34mm however these are special order drums and would take approx 4-6 weeks to produce.  For more information about the drums available for the Formatic R2200 burger machines or any other Formatic burger machine drums please call us on (0161) 366 1777.

R-Series Conveyor Belt - F123BK

Part Number F123BK - one required per machine This blue belt for the Formatic R-series standard conveyor is easily detached and fitted by loosening the conveyor belt assembly. This belt will fit all Formatic R-series standard conveyor belts with conveyor length of 332mm. The most common model of the Formatic R-series is the R2200.

R-Series Drum Retaining Nut - FF129A

Part Number FF129A - one required per machine This retaining nut for the Formatic R-series burger machines secures the burger drums into position and has an reverse thread. The most common model of the Formatic R-series is the R2200.

R-Series Extended 750mm Conveyor Assy - Z5801

Part Number Z5801 - can be retro-fitted to any R-series burger machine This extended conveyor belt has a length of 750mm, compared to the standard 332mm conveyor belt usually sold with the R2200 burger machine. The conveyor belt assembly can be quickly and easily added to an existing burger machine.   

R-Series Foot Pedal and Pipe - F1016

Part Number F1016 - one required per machine. This foot pedal and pipe is used to remotely control the Formatic R-series burger machines, the machine can also be used without the pedal by use of the switches on the burger machine itself. The most common model of the Formatic R-series burger machines is the R2200. 

R-Series Goose Neck Hopper

This Goose Neck Hopper for the Formatic R-series burger machines, allows the customer to continuously feed their Formatic R-series burger machine, which in turn reduced the amount of down time required when loading and re-loading the normal hopper.  The goose neck hopper has a maximum capacity of 45 litres (approx 90lb) and fits easily onto any of the Formatic R-series burger machines, including the Formatic R2200 burger machine and Formatic R2200/180 burger machine.

R-Series Hopper Retaining Knob - F124

Part Number F124 - four required per machine. This black retaining knob / nut is used to secure the hopper of a Formatic R-Series burger machine to the machine and prevent it moving when in use. The most common model of the Formatic R-series is the R2200.

R-Series Hopper Seal - F117A

Part Number F117A - one required per machine This is a complete one piece seal that sits underneath the hopper of the R-series burger machines. The most common model of the Formatic R-series is the R2200.

R-Series Paddle Retaining Knob - F130

Older Part Number F130 - 1 per machine required. (THIS PART HAS NOW BEEN REPLACED BY A NEWER VERSION) New Part Number F130B - 1 per machine required. This black retaining knob / nut is used to secure the paddles inside the hopper of the Formatic R-series burger machines. The most common model of the Formatic R-series is the R2200. 

R-Series Tension Bush for Burger Separation Assy - F429A

Part Number F429A - one required per machine. This tension bush allows tension to be pulled across the wire that helps separate the burger from the rotating burger drum.  The most common model of the R-series is the R2200.

R-Series Wire - F145

Part Number F145 - 1m required per machine (sold per metre) This Formatic R-series wire is used in two positions on the Formatic burger machines. The first position is in the assembly which helps separate the burger from the rotating burger drum, the second position is in the assembly which helps clean the conveyor belt from any burger residue.  The most common model of the Formatic R-series burger machines is the R2200.

Regulators

These regulators are perfect for using in conjunction with our Turbovac TPS Compact XL tray packers as well are the Italian Pack range for tray and skin packing machines. They are required to allow the machine to work correct when using MAP machines to regulator the gas supply into the tray packing machines.  Receive an additional 20% discount off this price when purchased with a tray or skin packer from our website. Discount will be added automatically at checkout.

Sickle blade - main cutting blade

These original Foodlogistik dicer sickle blades are imported directly from Foodlogistik and are made from the highest quality stainless steel. The cutting blades come in two different sizes to fit to the two main Foodlogistik machine model numbers, Classic 96 (or MS84 or MS90) and the Capacity 126 (or MS120 or MS120JM).  In an ideal world we recommend that a customer has two sets of all the blades for their Foodlogistik dicer, this allows our customers to send off one set of the blades to Superior Food Machinery for sharpening whilst the customer continues to use the other set of blades on their machine. This prevents down time and maintains the Foodlogistik dicers smooth, precise cutting action. The Foodlogistik dicer blades should not be sharpened on standard sharpening machines due to the profile edge, this will cause the blade to be miss align in its action and create poor dice results.  We offer a blade sharpening service we fast efficient turn around. We can collect the blades from you via our carrier and bring them back to SFM on a next day service, sharpen the Foodlogistik dicer blades and send them out on the carrier that same day, they are then delivered to you on a next day service. For more information on this sharpening service please call our service departs on (0161) 366 1777.

Vacuum Packer Service Kit - Double Chamber Models

This full service kit for the Turbovac table top vacuum packers contains everything required to service your machine and vacuum pump and comes with the following items: Simple to follow instructions Latex gloves Vacuum pump oil Vacuum pump air exhaust filters (to suit the vacuum pump in your machine) Vacuum pump oil filter Seal beam element wire (sealing wire) Seal beam teflon tape (to cover sealing wire) Seal beam anvil rubber (seal mechanism clamping rubber) Vac packer lid seal (the 'STE' models kits do not include lid seal)    

Vacuum Packer Service Kit - Single Chamber Models

This full service kit for the Turbovac table top vacuum packers contains everything required to service your machine and vacuum pump and comes with the following items: Simple to follow instructions Rubber gloves Vacuum pump oil Vacuum pump air exhaust filter (to suit pump in your machine) Vacuum pump oil filter Seal beam element wire (sealing wire) Seal beam teflon tape (to cover sealing wire) Seal beam anvil rubber (seal mechanism clamping rubber) Vac packer lid seal (580STE, 880STE kits do not include lid seal)    

Vacuum Packer Service Kit - Table Top Models

This full service kit for the Turbovac table top vacuum packers contains everything required to service your machine and vacuum pump and comes with the following items: Simple to follow instructions Rubber gloves Vacuum pump oil Vacuum pump air exhaust filter (when required) Vacuum pump oil filter (when required) Seal beam element wire (sealing wire) Seal beam teflon tape (to cover sealing wire) Seal beam anvil rubber (seal mechanism clamping rubber) Vac packer lid seal