Special options fitted as standard:
SKIN PACKING - Skin packaging applies vacuum technologies to thermo-sealing machines.
It consists in the upper film enclosing both the product and its tray, fitting around it like a second skin. Vacuum packaging further extends product shelf life.
The easy-peel packaging materials result in increased ease of opening for the end user (OPTIONAL).
Skin packaging is ideal for attractive product presentation, complete sealing, minimized product damage, high safety standards and enhanced hygiene and preservation.
By extending their shelf-life, skin packaging results in the increased commercial life of food stuffs.
Visibilty of the product is also imporved, allowing products to be displayed vertically, thus reducing food waste and returns by enhancing shelf replenishment and stock rotation processes.
When packaged in skin conditions, meat and meat products continue their maturation process for enhanced tenderness, adequate texture and optimum taste.
Once opened the product is immediately exposed to Oxygen and will only take a few minutes to regain its natural bright colour, without altering taste and freshness.
There are three different versions of skin packaging on the Oceania tray packer: non-protrusion, protrusion & protrusion onto flat board.
NON PROTRUSION - the height of the product does not exceed the depth of the tray in which it is packaged, to deliver optimum skin performance the tray height should be around 25-30mm
PROTRUSION - the height of the product exceeds the depth of the tray in which it is packaged, to deliver optimum skin performance the tray height must not exceed 20mm. The product can protrude above the tray lip by upto 30mm (standard) or 50mm (OPTIONAL)
PROTRUSION ONTO FLAT BOARD - a cutting edge evolution of protrusion skin packaging using flat product support instead of traditional packaging methods. The product can protrude above the support by upto 30mm (standard) or 50mm (OPTIONAL). This method allows for the use of flat packaging surfaces including cardboard, thus reducing the need for plastic. The method further offers muliple printing options, thus providing a wide array of custome-designed product packaging solutions.
As well as skin packaging, the Perseus MAP Skin packer can also MAP pack by the purchase of and additional base plate for the tray die/mould. Please call our sales team for more information on this (0161) 366 1777.
MAP - The introduction of the desired food gas mixture into the tray results in extended product life cycles and the optimum of atmospheres for enhanced product quality and freshness throughout the shelf-life.
Compared to over the counter food stuffs, packaging is safer and tamper-proof with reduced spoilage, waste and returns.
The use of increasingley suitable and advanced food gas combinations means the product maintains its original colour, taste and freshness unaltered.
Not only does the extended shelf-life of MAP products allow our customers to significantly simplify distribution with less frequent deliveries, it also fosters shelf management systems and maximizes turnover during promotional sales and peak demand periods.
Vacuum & gas MAP is a packaging process which involves creating a vacuum to remove the air from the package, followed by the injection of the desired gas mixture via different pressures. The tray is then sealed trapping the gas mixtures inside with your product.
The Italian Pack Perseus Skin Packer is a fully automated machine that has been designed to meet all the needs of the packaging industry with different models available for sealing, partial vacuum, skin, gas flush and MAP.
The distinctive features of the entire Perseus line is its high-quality, high-speed, high-safety performance that is typical of more expensive machines with bigger footprints.
Constant research into new technologies has helped Italian Pack develop a compact machine that masterfully combines state-of-the-art, cutting edge systesm with user-friendly high reliable equipment.
Whats sets the Perseus tray packers apart is the possibilty to customer design them and to integrate them with additional technical components to meet complete line requirements.
After decades of designing and manufacturing sophisticated packaging lines, our technical office is able to offer turnkey, complex packaging solutions fitted with infeed and outfeed conveyors, tray aligners, tray denesters, checkweighers., vibration and dosing units as well as markers.
Italian Pack Perseus Tray Packers can pack up to 60 trays/min in seal only mode, 32 trays/min in MAP mode and 28 trays/min in Skin mode. The same duly configured die/mould allows for different types of packaging: seal-only, MAP and Skin.
The special film waste re-winder, a PLC touch screen to monitor machine parameters and dedicated die/mould extraction and change systems are some of the technical features that make this machine stand out among others.
Its small features, competitive price and low operating costsmake this machine ideal for high-efficiency and high-performance standards.
Easy Opening: easy opening without tools for daily cleaning
Electric box: AISI 304 IP67 stainless steel electric box, wire welded frame, numbered cables, ensures easy access for cleaning operations.
Easy Access: Access to sealing, vacuum units and feeding chains through front door for quick and easy maintainance and cleaning operations.
PLC Touch Screen Control Panel: 7" PLC touch screen, 65000 display colours, USB/ethernet, 99 packaging programs, language selection, integrated temperature control, menu-driven MAP, parameters, skin tray and gradual vacuum.
Optional Gas Buffer Tank: stainless steel gas buffer tank with pressure regulator for use when wanting to MAP as well as Skin pack
Optional Dosing Unit: Automatic dosing of solids, liquids and granules.
Optional Tray Denester: tray denester with up to 4 lines. Quick format change available.
Optional Modular conveyor Lines: Infeed conveyors available in different sizes, all suitable for any custom-designed system and for integration with tray denesters, dosing machines and loading positions, also specials with food vibrators and weighers.
Optional Motor Driven Outfeed conveyor Line: motorized outfeed conveyor allows for the channeling of multiple tray lines into a single tray line for weighing, labelling and metal detection.
Optional Teleservice: Remote tele-assistance via the company modem.
Optional 90' Infeed Conveyor: automatic tray infeed system with a 90 degree conveyor from 1 to several tray lines
Optional Auto infeed conveyor: automatic tray in-line conveyor from 1 to several tray lines.