Vacuum packer options (please call for pricing)
The Turbovac D30 vacuum packer is the new version of the old 900STE XL and 950STE XL vacuum packers.
As with all D-range models (except D60) the vacuum packer is constructed from stainless steel with a stainless steel chamber. The vacuum packer's electrical parts are all covered by IP65 water and dust level protection and the chambers are easily cleaned after use.
The vacuum packer has a digital control panel that can store up to 10 different programmes. Each programme can be set with individual settings for the packaging of different types of product, this reduces the amount of down time needed when changing over from one product to another. The control panel of the vacuum packer comes with sensor control which allows the operator to set the exact amount of vacuum they would like to achieve which each product and it is accurate to within 1mBar of vacuum pressure.The digital control panel also tell the operator when the vacuum packing machine requires a service.
The D30 vacuum packer comes with four seal beams all of 820mm in length with a distance of 700mm between each pair. There are two seal beams in each vacuum packer chamber and they create a double seal imprint on the vacuum bag /pouch. The D30 vacuum packer can be fitted with seal and cut off at an extra cost, with each wire being controlled separately by the digital control panel.
There are various different vacuum packers available in the D-range so if you think this machine is not suitable for your needs take a look at the D60, D10 and D40 vacuum packers.