Nowicki KN550 Hl bowl chopper designed for general production of smoked, steamed and raw sausages and vast possibilities in production of superb fine grain emulsion from crude materials like pig skin and tendons, very fine fresh and/or pre-cut frozen meat granulating dedication to Salami products and spiced stuffing preparation with other edible products.
The Nowicki KN550HL bowl chopper has been manufactured with acid resistant stainless steel according to CE directives. The self supporting construction panels, cutter head and knife cover of the bowl chopper are all made from stainless steel. Nowicki have designed the cutting chamber of the bowl chopper to be narrow which gives optimal performance and results of product production. The Nowicki KN550 HL bowl chopper has the very minimum of distances between knife and bowl which gives perfect results of 'cutting in the air'. The bowl chopper features hydraulically operated knife cover (stainless steel) and front cover (Plexiglass), the loading of 200 litre tote bins and operation of the unloading disc is also done hydraulically. All this is control by the use of joysticks on the control panel of the bowl chopper. The Nowicki KN550 HL bowl chopper is extremely stable due to its 7500kg weight, this stability prevents any unwanted vibration reaching the knife shaft bearings, giving them a longer life cycle. All covers on the bowl chopper lift up, giving access to all parts for better hygiene and ease of cleaning. The bowl chopper's knife shaft speed and bowl speed is controlled smoothly using the control panel. The bowl chopper comes as standard with a semi-automatic key for the cutter head, allowing quick and secure removal and fitting. A central lubrication system in the bowl chopper takes away the need to consistently check this lubrication on the cutter head, giving reduced down time. The bowl chopper is fitted with a AC drive motor as standard which has lower acid resistant shield for additonal motor protection. The Nowicki KN550 HL bowl chopper has a touch panel control panel, with joysticks. This control panel allows temperature control of product in the bowl, programming and manual work modes. The bowl chopper is fitted with adjustable stainless steel feet for uneven floors and a 5m length of cable which is covered with stainless steel tube.