FOR SALES & ADVICE CALL 0161 366 1777
WORLDWIDE SHIPPING AVAILABLE
FREE UK DELIVERY ON ORDER OVER £50

Nowicki Bowl Chopper - KN 60

Code: KN 60
Item out of Stock   |   Usually dispatched within 24 hours
Loading...
  • External Dimensions (WxDxH) See diagram
  • Power 3ph 18.5kW
  • Volume 60 litre
  • Capacity 40-50kg meat & product for homogenization, 30-35kg of salami type product
  • Knife Speed Variable between 200 to 6000rpm, mixing speed variable between -200 to -400rpm
  • Digital Thermometer included
  • Control Panel Manual with 5 pre-programmed cutting speed, 2 pre-programmed mixing speed
  • Weight 1350kg

Optional extras:

  • Increased knife motor to 22kW
  • Manual unloading disc
  • Auto lubrication of knife shaft
  • Dynamometer key for cutting head 

N.B. This machine not kept in stock and is ordered at time of purchase, delivery can take up to 9 weeks

The Nowicki KN60 bowl chopper is ideal for the general production of smoked, steamed and raw sausages and the vast possibilities in production of superb fine grain emulsions from crude materials like pig skin and tendons. The bowl cutter can also be used for very fine, fresh and or pre-cut frozen meat granulating as well as spiced stuffing preparation with other edible products. The Nowicki KN60 bowl cutter can handle up to 40-50kg of meat at one time of homogenized product and about 30-35kg of salami type product. 

The Nowicki KN60 bowl cutter is manufactured from high quality acid resistant stainless steel according to all current CE directives. All surfaces are polished with horizontal surfaces inclined to allow water drainage. The bowl chopper has a stainless steel cutter head cover with a Plexiglass front cover for viewing the product during processing. Both covers are manually operated. The stable construction of the bowl chopper along with weight of 1.3 ton and stainless steel adjustable feet means the bowlc hopper has little to no vibrations, which in turn means no problems with the bearings on the knife shaft. The bowl chopper is controlled using a micro processor control panel with programming mode for particular repeatable steps. The bowl chopper smoothly transitions between speeds of the knives and bowl. A new generation of cutter head on the Nowicki bowl chopper's allows for quick dismantling of the knives. The bowl chopper has a 18.5kW AC drive motor, protected by a lower stainless steel shield for additional motor protection. The stuffing temperature can be monitored via the control panel and also used as a trigger in programming to move on to another step in the processing. The bowl chopper is fitted as standard with emergency brake for both knife and bowl. A knife shaft speed of 6000rpm is perfect for meat emulsions.

The Nowicki KN60 bowl chopper has a pre-programmed control panel set up as standard with the following speeds:

  1. As loading: 500 rpm of knives, 4 revolutions of the bowl – no other limits
  2. As pre-cutting: 1500 rpm of knives, 6-7 revolution of bowl - no other limits
  3. Cutting : 4000 rpm, 6-7 revolution of the bowl
  4. Cutting : 6000 rpm, 6-8 revolution of the bowl. temperature limit eg +8'C
  5. For salami can be: 2000 rpm, 6 revolutions of the bowl, for 20 revolutions and step is over. 

Reverse:

  1. -200, 5-6 rev no obligation
  2. Any other option with time limit

However if you require the pre-programme to be altered this can be done at the time of manufacture by Nowicki to suit your special requirements. Each pre-progammed step on the bowl cutter can be determinded by temperature of batch, time of processing, number of bowls revolutions.

The control panel also allows for manual control fo the setting of the speed of the knives and the bowl as well as showing current working time, or amount of bowl rotations, and continuous measurements of stuffing temperature. The bowl cutter control panel is fitted as standard with a cover to protect against water jet.

The Nowicki KN60 bowl chopper has an electrical box which is made from stainless steel and is IP 55 rated, this is put seperately away from the bowl cutter and is mounted on the wall. The cable is 5m long and is supplied in stainless steel piping. 

For more information on the Nowicki KN60 bowl cutter please download the brochure. 

Other models you might be interested in: KN90, KN125, KN125V, KN200

Top