The Kolbe K430S meat bandsaw is built to Kolbe's usual high standards from stainless steel, all the parts on the bandsaw are without sharp corners and are easily accessible for quick and easy cleaning.
The Kolbe meat bandsaw takes a bandsaw blade of length 3370mm which runs at a high speed of 32 metres per second. This enables the machine to take an extremely thin blade to reduce your waste and improve product appearance. The bandsaw blade is easily removed using the tension device on the upper wheel and the bandsaw blades efficient cleaners are simply tilted away from the blade to allow for convenient and safe blade replacement.
The Kolbe meat bandsaw comes complete with a fixed table and additional half sliding table as standard, portion thickness plate and product pusher to allow a quick and precise cutting action. The bandsaw blade travels through the table via a stainless steel blade guide which can be removed simply without the use of a tool, keeping the blade in the correct position for the perfect cut.
The K430S bandsaw is one of our best selling bandsaws and is ideal for use in an industrial environment. The bandsaw is a perfect addition to any meat processor or large butchery where long shifts are the norm.
There is also an option of a fine portioning device with the bandsaw which allows a more precise cutting width (please call for more information and pricing)
If you would prefer a bandsaw with a fixed table that can be quickly converted into a full sliding table then take a look at the K440RS bandsaw from Kolbe.
Or if you need an very big bandsaw for cutting up carcusses then look no further than the Kolbe K800 meat bandsaw, ideally suited with a roller bed table to make your work easy.
If you are looking to spend a little less money but would like a bandsaw with similar specification then take a look at the Medoc STL range of bandsaws or the Kolbe K330 floor standing bandsaw.
