The Medoc STL600 meat bandsaw is new to Medocs bandsaw range. Fitting in between the STL480 bandsaw and the STL800 bandsaw.
The STL600 meat bandsaw is designed for use in the meat and fish industries, with special robustness for large processing facilities. The bandsaw is designed with ease of operation in mind.
The Medoc STL600 bandsaw is made from 18/10 stainless steel, with stainless steel blade wheels which are double lipped to prevent blades bouncing off the wheels during operation. The meat bandsaw has a blade tension device which makes it easy to get the correct blade tension without being able to over tighten the blade. The on/off buttons and emergency stop button are IP69 rated and the blade stops running within 4 seconds of pressing the stop buttons or opening of side doors etc.
The Medoc STL600 comes with several blade cleaning fast wear kits, which are designed to clean the blade and blade wheels, preventing product build up and keeping the bandsaw operating at its optimum. These detachable cleaners are removable without the use of any tools and the machine can be cleaned using water pressure.
The Medoc STL600 bandsaw can be ordered with the blade on the right or left hand side of the table depending on your requirements.
If the STL600 bandsaw is too small for you then please take a look at the STL800.
For more information on this meat bandsaw please download the brochure (below) or call our sales team on (0161) 366 1777.
Choose a Repayment Term (Months)