1200x600mm Professional Butchers Block (4ft by 2ft)
External dimensions (WxDxH) 1200x600x200mm External dimensions (WxDxH) 1210x610x900mm (on standard stand) External dimensions (WxDxH) 1210x610x1075mm (on tall stand) Construction Acacia wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can withstand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
1500x600mm Professional Butchers Block (5ft by 2ft)
External dimensions (WxDxH) 1500x600x200mm External dimensions (WxDxH) 1510x610x900mm (on standard stand) External dimensions (WxDxH) 1510x610x1075mm (on tall stand) Construction Acacia wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can wistand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
1800x600mm Professional Butchers Block (6ft by 2ft)
External dimensions (WxDxH) 1800x600x200mm External dimensions (WxDxH) 1810x610x900mm (on standard stand) Construction Acacia wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can wistand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
1800x750mm Professional Butchers Block (6ft by 2.5ft)
External dimensions (WxDxH) 1800x750x200mm External dimensions (WxDxH) 1810x760x900mm (on stand) Construction Acacia Wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can wistand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
600x600mm Professional Butchers Block (2ft by 2ft)
External dimensions (WxDxH) 600x600x200mm External dimensions (WxDxH) 610x610x900mm (on stand) Construction Acacia wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can withstand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
900x600mm Professional Butchers Block (3ft by 2ft)
External dimensions (WxDxH) 900x600x200mm External dimensions (WxDxH) 910x610x900mm (on stand) Construction Acacia wood with interlinked steel tie rods (not single rods like other manufacturers) Stand construction Aluminium with 3-bar under shelf Acacia trees grow in such abundance in many regions of the world, that they are considered an invasive species. Acacia is a sustainable, dense, durable hardwood that can withstand the elements. It is often used in boat building and durable floors. Acacia is 55% harder than Oak, and 90% harder than carbonised bamboo flooring. It is harder than Maple and has less porosity (void spaces between) than a lot of other hardwoods. Our blocks are made 200mm thick, thicker than most other blocks on the market adding extra weight to the block makes it a truly solid base when being struck with a clever.
A/E32 Commercial Meat Mincer - Table Top
External Dimensions (WxDxH) 300x536x587mm Feedpan Dimensions (WxD) 610x410mm Throughput rate 7.5kg/min Motor 3HP 2.2kW Electrics 1ph 13AMP Weight 59kg Material of Body st/st Material of Head st/st The Omega A/E32 Tabletop Meat Mincer is a heavy-duty commercial meat mincing machine designed for butchers, meat processors and food preparation businesses. Featuring a size 32 stainless steel mincing head and rated output of up to 450kg per hour (7.5kg/min), the A/E32 offers high-capacity mincing in a compact tabletop design. Manufactured in Italy, the machine features a stainless steel body, removable feed pan with safety switch, and start, stop and reverse controls. The Omega A/E32 is ideal for butcher's shops wanting a professional mincer that can be positioned behind the counter or used in a dedicated meat preparation area. Supplied by Superior Food Machinery, the A/E32 is listed with a 4.5mm mincing plate, with alternative plate sizes available on request. Single-phase and three-phase versions are available within the manufacturer's range; please confirm the electrical specification of the machine being supplied.
Automatic Frozen Block Mincer - W 200B
External Dimensions (WxDxH) 2420x1875x1950mm (3260x2100x3275mm with hoist) Capacity of Hopper 600 litres Throughput Upto 2800kg/h (20mm plate) 2300kg/h (8mm plate) Main Drive Motor 55kW Feed Worm Motor 15kW Weight 3500kg (3900kg with hoist) Capable of mincing frozen blocks at -18'C (block size 600x400x200mm) Speed of grinding worm 170 rpm Speed of feeding worm 5-11 rpm
External dimensions (WxDxH) see diagram Blade size 350mm (14") Slice thickness 0-25mm adjustable Motor 0.4HP Weight 68kg Construction stainless steel Feet type stainless steel wiith rubber base Button type st/st with IP65 rating Drive type gear driven
External dimensions (WxDxH) see diagram Blade size 350mm (14") Slice thickness 0-15mm adjustable Motor 0.50HP Weight 45kg Construction rounded aluminium frame with st/st screws and fittings Feet type telescopic aluminium with rubber base Button type st/st with IP67 rating Drive type belt driven
External Dimensions (WxDxH) 760x600x1400mm Power 9000 watts Voltage 3-phase 400V Speed 1500 & 3000rpm (2-speed) Bowl 45 litre stainless steel with 2 x handles Motor Base stainless steel Control Panel IP65 with digital minute timer Weight 199kg
External Dimensions (WxDxH) 810x600x1400mm Power 11000 watts Voltage 3-phase 400V Speed 1500 & 3000rpm (2-speed) Bowl 60 litre stainless steel with 2 x handles Motor Base stainless steel Control Panel IP65 with digital minute timer Weight 210kg
External Dimensions (WxDxH) 765x525x685mm (without stand) Max Slices per Minute 100 Slice thickness 4-24mm Max Input Width 360mm Max Input Length 350mm Max Input Height 140-160mm Weight 110kg (without stand) Blade Type Circular knife with 420mm diameter
External Dimensions (WxDxH) 800x1130x710mm Max Slices per Minute 160 Slice thickness 4-24mm Max Input Width 320mm Max Input Length 390mm Max Input Height 140-160mm Weight 200kg Blade Type Circular knife with 420mm diameter
External Dimensions (WxDxH) 800x1100x730mm Max Slices per Minute 220 Slice thickness 4-24mm Max Input Width 350mm Max Input Length 400mm Max Input Height 140-160mm Weight 220kg Blade Type Circular knife with 420mm diameter
C4000/180 Automatic Burger Forming Machine
External Dimensions (WxDxH) 780x795x710mm Throughput 8000/hr (variable) Power 1.1kW (1 phase) Hopper 45 litre Weight 110kg N.B Compressed air required to run this machine, this is used for the auto wire cleaning mechanism
Dimensions (WxDxH) 495x558x351mm Portions per minute 7 chicken breasts Max product height 45mm Slicing options 2,3,4 or 5 slices Belt Length 310mm Electrics 1ph Weight 39kg The ideal machine to make chicken schnitzels, slicing one chicken breast into several thin layers which in turn saves time and money.
Crossfeed Meat Mincer - AW52-240
External Dimensions (WxDxH) 1570x1510x1683mm Throughput 3000kg/hr Main Drive Motor 15kW Weight 950kg Material of Body st/st Material of Head st/st OPTIONS AVAILABLE: Increased Drive Motor to 22kW for extra £
Crossfeed Meat Mincer - AWK130-160
External Dimensions (WxDxH) see diagram Throughput 2500kg/h Main Drive Motor 15kW or 22kW Weight 800kg Material of Body st/st Material of Head st/st
Cutting System External Dimensions (WxDxH) see diagram Cutting System Power 4kW 16A 3ph Cutting System Throughput Up to 1200 cuts/min (dependant on sausage length and casing type) Cutting System Type of casing all artificial or natural casings accepted Cutting System Portion Lengths Min 40mm Max 800mm Cutting System Calibre Range 14 to 40mm Cutting System Weight 260kg WORKS WITH ALL TYPES OF SAUSAGE FILLER
DCM90 Semi-Automatic Double Clipper
External Dimensions (WxDxH) 72x70x175cm (varies depending on options) Caliber of product 25 - 85mm (depending on casing material) Clip Range E200, E210, E220, E230, E240 (depending on casing material) Air consumption 5.7N Sound Power Level (LpA) 75 dB Weight 77kg (varies depending on options)
DicR Capacity 126 Industrial Meat Dicer with Conveyor
Throughput (optimum conditions) 2600 kg/h Product chamber length 550mm Product chamber cross section 126x126mm Dicing grid size 120x120mm Dicer's cutting length 0-42mm Motor power 4.3kW Weight 430kg Construction stainless steel
DicR Capacity 126 Industrial Meat Dicer with Gantry
Throughput (optimum conditions) 2600 kg/h Product chamber length 550mm Product chamber cross section 126x126mm Dicing grid size 120x120mm Dicer's cutting length 0-42mm Motor power 4.3kW Weight 430kg Construction stainless steel
DicR Classic 90 Soft & Hard Cheese Dicer
Throughput (Optimum conditions) 1100kg/h (18kg/min) Product chamber length 310mm Product chamber cross section 90x90mm Dicing grid size 90x90mm Dicing grid type 7.5x7.5mm wire (soft cheese), fixed blade (hard cheese) Cutting length 0-45mm Motor power 2.6kW 3-phase Weight 260kg Construction stainless steel
DicR Classic 96 Industrial Meat Dicer
Throughput (Optimum conditions) 1100kg/h (18kg/min) Product chamber length 310mm Product chamber cross section 96x96mm Dicing grid size 90x90mm Cutting length 0-45mm Motor power 2.6kW 3 phase Weight 260kg Construction stainless steel
DicR Comfort 112 Industrial Meat Dicer
Throughput (Optimum conditions) 2100kg/h (18kg/min) Product chamber length 530mm Product chamber cross section 105x105mm Dicing grid size 105x105mm Cutting length 0-45mm Motor power 4.5kW 3 phase Weight 590kg Construction stainless steel
DicR Comfort 112 Industrial Meat Dicer with Conveyor
Throughput (Optimum conditions) 2100kg/h (18kg/min) Product chamber length 530mm Product chamber cross section 105x105mm Dicing grid size 105x105mm Cutting length 0-45mm Motor power 4.5kW 3 phase Weight 590kg Construction stainless steel
Buy this ex demonstration Omega MM50 meat mixer, in very good condition. No. of mixer blades 1 Mixer capacity 50kg Mixer motor 1.5kW, 2HP 1phase Mixer net weight 85kg Mixer construction 304 stainless steel casing, bowl and blades Hopper type tip-up bowl for emptying out the mixture Mounting type fixed stand with 4 wheels Mixing type forward and reverse mixing as standard
External Dimensions (WxDxH) 1570x780x1130mm Power 3ph 7.5HP (5.6kW) Volume 30 litre Mix Capacity +/- 5-22kg Knife Speed Variable between 500-3500rpm Digital Thermometer included Digital Display showing knife speed, temp, elapsed time, current time Auto stop programmable for elapsed time or temperature limit Weight 330kg
K330S Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 2490mm Blade Speed 22 m/s Blade Wheel Type Stainless steel with double rim Blade Wheel Diameter 300mm Max Cutting Height 311mm Max Cutting Thickness 282mm Motor 1.5kW Electrics 3ph 16AMP Construction stainless steel Weight 155kg Table Dimensions (WxDxH) 590x765x910mm
K380RS Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 3070mm Blade Speed 28 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 380mm Max Cutting Height 346mm Max Cutting Thickness 357mm Motor 2.5kW Electrics 3 phase 16AMP Construction stainless steel Net Weight 270kg Table Dimensions (WxDxH) 757x900x910mm
K430RT Floor Standing Meat Bandsaw - Roller Table
External Dimensions 1015x935x1968mm Max Cutting Height 367mm Max Cutting Thickness 405mm Table Dimensions (WxDxH) 840x960x910mm Blade Length 3370mm Wheel Size 430mm Motor 2.9kW Electrics 3 phase 16AMP Blade Speed 32 m/s Construction stainless steel Net Weight 305kg
K430S Floor Standing Meat Bandsaw - Sliding Table
External Dimensions 980x935x1845mm Max Cutting Height 403mm Max Cutting Thickness 412mm Table Dimensions (WxDxH) 840x960x910mm Blade Length 3370mm Wheel Size 430mm Motor 2.5kW Electrics 3 phase 16AMP Blade Speed 32 m/s Construction stainless steel Net Weight 305kg
K440RS Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 3370mm Blade Speed 32 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 430mm Max Cutting Height 403mm Max Cutting Thickness 412mm Motor 2.5kW Electrics 3 phase 16AMP Construction stainless steel Weight 305kg Table Dimensions (WxDxH) 879x970x910mm
External Dimensions (WxDxH) 1250x940x1200mm Power 3ph 23HP (17kW, 32A) Knife Motor Power 21HP (15.5kW) Bowl Motor Power 2HP (1.5kW) Volume 55 litre Mix Capacity +/- 7-37kg High Cutting Speed 500 to 5000rpm variable Slow Cutting Speed 50 to 500rpm, forward and reverse (standard) Digital Display showing gear, knife speed, temp, turns, elapsed time, current time Auto stop programmable for elapsed time, temp or turns of bowl Motorized ST/ST knife lid Weight 900kg
K800 Floor Standing Meat Bandsaw - Fixed or Roller Table
External Dimensions (WxDxH) see diagram Blade Length 4430mm Blade Speed 32 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 430mm Max Cutting Height 575mm Max Cutting Thickness 800mm Motor 4kW Electrics 3 phase 16AMP Weight 690kg Roller Table Dimensions 1435x960mm Fixed Table Dimensions 1465x1100mm
K95S Power Plus Bowl Cutter / Chopper
External Dimensions (WxDxH) 2890x1060x1820mm Power 3ph 42HP (32kW) Volume 95 litre Mix Capacity +/- 20-70kg soft product 20-50kg tough product Knife Speed Variable between 50-5000rpm Digital Thermometer included Digital Display showing knife speed, temp, elapsed time, current time Auto stop programmable for elapsed time or temperature limit Unloading arm Manual operation with variable speed stepped disc 50-150rpm Weight 1440kg
KDCM Semi-Automatic Double Clipping Machine
External Dimensions (WxDxH) 135x112x190cm (varies depending on options) Caliber of product 25 - 85mm (depending on casing material) Clip Range E200, E210, E220, E230, E240 (depending on casing material) Air consumption 5.7N Sound Power Level (LpA) 75dB Weight 105kg (varies depending on options)
KT-S Electric Fish Scaler - Commercial Fish Descaling Machine
External Dimensions (WxDxH) 230x190x240mm Motor 0.1kW Weight 9kg N.B. If you buy this machine you have 14 days to change your mind for whatever reason, we will collect the machine from yourself and as long as the machine is still in working order and is not physically damaged we will issue you a full refund.
External Dimensions (WxDxH) 710x780x1085mm Max. Capacity 20-25kg Speed 26 rpm Motor 1phase Time Control Standard PLEASE NOTE: THIS MACHINE NOW COMES AS STANDARD WITH A ST.ST LID INSTEAD OF THE PERSPEX ONE SHOWN IN THE PHOTO.
MDB Automatic Meatball Rounder
Length min-max 700-875mm Width 595mm Input Height min-max 850-1050mm Output Height min-max 610-1185mm Weight 70kg Throughput 6000 meatballs/ per hour (two balls at a time) Needs to be fed by Formatic burger machine fitted with a meatball forming drum
External Dimensions (WxDxH) 620x1260x1540mm Throughput 1600kg/h Motor 10HP (7.5kW) Weight Material of Body st/st Material of Head st/st CAPABLE OF MINCING AT -15'C ON A 4.5mm PLATE & -10'C ON A 3mm PLATE.
External Dimensions (WxDxH) 900x540x1115mm Throughput 950kg/hour Motor 4HP Weight 97kg Material of Body st/st Material of Head st/st
External Dimensions (WxDxH) 410x610x580mm Electric Supply 1ph "13amp " or 3ph Throughput 750kg/h Motor 2.25kW 3HP Weight 80kg Material of body st/st Material of head st/st
External Dimensions (WxDxH) 670x990x1315mm Electric Supply 3ph Throughput 1500kg/h Motor 7.45kW 10HP Weight 160kg Material of body st/st Material of head st/st
External Dimensions (WxDxH) 900x540x1115mm Throughput 950kg/hour Motor 4HP Weight 97kg Material of Body st/st Material of Head st/st
Meat Mixers No. of mixer blades 2 Meat Mixers capacity 120kg Meat Mixers motor 1.85kW, 2.5HP Meat Mixers net weight 120kg Meat Mixer construction 304 stainless steel casing, bowl and blades Meat Mixer Hopper type tip-up bowl for emptying out the mixture Meat Mixer Mounting type fixed stand with 4 wheels
No. of mixer blades 2 Capacity 180kg Motor 1.85kW, 2.5HP Weight 120kg Construction 304 stainless steel casing, bowl and blades Hopper type tip-up bowl for emptying out the mixture Mounting type fixed stand with 4 wheels
No. of mixer blades 1 Mixer capacity 90kg Mixer motor 1.85kW, 2.5HP Mixer net weight 110kg Mixer construction 304 stainless steel casing, bowl and blades Hopper type tip-up bowl for emptying out the mixture Mounting type fixed stand with 4 wheels Mixing type forward and reverse mixing as standard
No. of mixer blades 1 Mixer capacity 30kg Mixer motor 0.75kW, 1HP Mixer net weight 40kg Mixer construction 304 stainless steel casing, bowl and blades Hopper type tip-up bowl for emptying out the mixture Mounting type table top with option of seperate stand Mixing type forward and reverse mixing as standard NB. MACHINE DOES NOT COME WITH A STAND, IF YOU NEED ONE PLEASE CALL OUR SALES TEAM 0161 366 1777
No. of mixer blades 1 Mixer capacity 50kg Mixer motor 1.5kW, 2HP 1phase Mixer net weight 85kg Mixer construction 304 stainless steel casing, bowl and blades Hopper type tip-up bowl for emptying out the mixture Mounting type fixed stand with 4 wheels Mixing type forward and reverse mixing as standard
Meat Press - ALP Schnitzel Press
Meat Press External Dimensions (WxDxH) 440x800x850mm Meat Press Throughput 800 steak per hour Meat Press Motor 1.5kW Meat Press Weight 160kg Meat Press Plate Diameter 280mm Options smooth plate for chicken Product thickness adjustable by use of the top wheel
External Dimensions (WxDxH) 380x600x1040mm Throughput 250kg/h Power 0.55kW Motor Speed 1340rpm Weight 61kg Electrics 400V 50Hz 3ph
Meat Slicer - MA350 Automatic carriage
Slicer external dimensions (WxDxH) 670x810x530mm Slicer blade size 350mm (14") Max slice thickness 25mm Slicer Motor 0.4HP Slicer weight 83kg Slicer construction rounded stainless steel Slicer feet type stainless steel with rubber base Slicer button type plastic with rubber covers and IP66 rating Slicer drive type gear driven Slicer carriage speed 32 slices/min
Slicer external dimensions (WxDxH) 570x725x435mm Slicer blade size 300mm (12") Slice thickness 0-25mm adjustable Gripper Spike Depth 2mm (leaving 3mm of product) Slicer Motor 0.4HP Slicer weight 62kg Slicer construction rounded stainless steel Slicer feet type stainless steel with rubber base Slicer button type Plastic with rubber cover and IP66 rating Slicer drive type gear driven
Meat Slicer - MG350 - "Catering Butchers Choice"
External dimensions (WxDxH) 590x775x455mm Blade size 350mm (14") Slice thickness 0-25mm adjustable Gripper Spike Depth 2mm (leaving 3mm of product) OR 7mm (leaving 10mm of product) Motor 0.4HP Weight 68kg Construction rounded stainless steel Feet type stainless steel with rubber base Button type plastic with rubber covers and IP66 rating Drive type gear driven
Meat Slicer - MG350/S Industrial applications
External dimensions (WxDxH) 590x775x455mm Blade size 350mm (14") Slice thickness 0-25mm adjustable Gripper Spike Depth 2mm (leaving 3mm of product) Motor 0.4HP Weight 68kg Construction rounded stainless steel Feet type stainless steel with rubber base Button type Industrial waterproof (IP69K) Electrics Cover Industrial waterproof (IP65) Drive type gear driven
Meat Stringing Machine - TGM350
External Dimensions (WxDxH) see diagram Tunnel Diameter 320x300mm Speed (single binding) upto 60 knots/min Speed (double binding) upto 50 knots/min Power 1kW 230V (16A)
Meat Stringing Machine - TGM350A Auto
More information coming soon. Automatic tunnel stringing machine with infeed and outfeed conveyors, 1,2 & 3 fold tying available.
External Dimensions (WxDxH) 385x445x950mm (with handle at top position) Max Product Height 125mm Max Product Width 300mm Number of Blades 544 Cutting Width of Blade 5mm
Meat Tenderiser - PK Semi Auto
Meat Tenderiser External Dimensions (WxDxH) 430x400x390mm Meat Tenderiser Capacity upto 1200 steaks/hr Meat Tenderiser Motor 0.37kW Meat Tenderiser Weight 36kg
External Dimensions See diagram Number Tenderiser Blades 833 Width of Cutting Area 600mm Max Height of Product 150mm Throughput 4000kg/h Head Strokes 15-30 cycles/min (adjustable) Conveyor Type 3 speeds Electrics 3PH 400V 50Hz 3kW Weight 450kg
Meat Tenderiser - TSE Semi Auto
Tenderiser External Dimensions (WxDxH) 1800x1200x600mm Tenderiser Max Product Height 140mm Tenderiser Area that can be tenderised 300mm Tenderiser Number of needles 574 Tenderiser Width of needles 2 or 3mm Tenderiser Weight 180kg
Meat Tenderiser - TSHY Semi Auto
Tenderiser External Dimensions (WxDxH) 510x860x1600mm Tenderiser Max Product Height 120mm (tenderised from top and bottom) Tenderiser Actual Tenderising Width 300mm Tenderising Speed +/- 1 stroke/sec Tenderiser Board Length 800mm Tenderiser Power 1.5kW (3phase)
Meatball Forming Machine - RKF - Yr.2024
Second hand machines refurbished to be as good as new in REX's factory. model 2024 complete overhaul 6 months warranty on spare parts, except wear parts Call now to reserve, this machine will take approx. 2 weeks at REX then 7-10 days delivery into ourselves.
External Dimensions see diagrams Portions per minute Up to max. 600 (depending on meatball head chosen & size of meatball) Meatball Sizes 20 to 60mm (fixed) Conveyor Belt Size 1260 x 320mm Supply Voltage 230V + PE Compressed Air Consumption 2m3h, 6 bar Water Consumption 0.5l/min Net Weight Max.270kg (depending on meatball head chosen) Other Products Required Vacuum filler, compressed air
MH-117 SAS Automatic Industrial Brine Injector
External Dimensions (WxDxH) 2040x2440x2200mm Throughput Upto 3000kg/h (depending on product) Working Width 450mm Working Height 40-210mm Number of needles 117 (single needle) Conveyor Belt Speed 21, 42 or 84mm/cycle (adjustable) Stroke of Injection Head 20-60 strokes/min Electrics 3ph 400V 50Hz 9.7kW + 1.1kw for rotary filter tank Weight 1250kg The Nowicki MH-117 SAS is a high-performance industrial brine injector designed for accurate and consistent injection of meat, poultry and other suitable food products. Featuring a 117-needle injection head, advanced servo-controlled technology and a maximum production capacity of 5,000kg per hour, the MH-117 SAS provides precise control over injection patterns, brine distribution and conveyor movement. With an adjustable injection range of 5–120% and a 450mm-wide conveyor, the Nowicki MH-117 SAS is ideal for manufacturers processing bacon, ham, poultry and other cured or marinated products.
MH-212 SAS Automatic Industrial Brine Injector
External Dimensions (WxDxH) 2460x3100x2200mm Throughput Upto 6000kg/h (depending on product) Working Width 750mm Working Height 40-210mm Number of needles 212 (single needle) Conveyor Belt Speed 68, 102 or 204mm/cycle (adjustable) Stroke of Injection Head 10-60 strokes/min Electrics 3ph 400V 50Hz 17.5kW Weight 1350kg The Nowicki MH-212 SAS is a high-capacity industrial brine injector designed for accurate and consistent injection of meat, poultry and other suitable food products. Featuring a 212-needle injection head, advanced servo-controlled operation and a maximum production capacity of 6,000kg per hour, the MH-212 SAS provides precise control over injection patterns, brine pressure and conveyor movement. With an adjustable injection range of 5–120%, a 750mm-wide conveyor and multi-stage brine filtration, the Nowicki MH-212 SAS is ideal for manufacturers processing bacon, ham, poultry and other cured or marinated products.
MHM-21 Automatic Industrial Brine Injector
External Dimensions (WxDxH) 760x1440x1840mm Throughput 350-600kg/h (depending on product) Working Width 326mm Working Height 160mm Number of needles 21 (single needle) 42 (double needle) Conveyor Belt Speed 12, 16, 35 mm/cycle (adjustable) Stroke of Injection Head 21 or 42 strokes/min Electrics 3ph 400V 50Hz 2.1kW Weight 330kg The Nowicki MHM-21 Automatic Meat Injector is a compact industrial brine injection machine designed for consistent injection of brine, curing solutions and liquid marinades into meat and poultry products. Featuring 21 or 42 injection needles, depending on the head fitted, the MHM-21 offers adjustable brine pressure, a 326mm working width and a practical throughput of approximately 350–600kg per hour, depending on the product. Suitable for bone-in and boneless meat, the Nowicki MHM-21 is ideal for smaller meat processors, bacon and ham manufacturers, poultry processors and food producers looking to improve injection consistency and reduce manual preparation time.
External Dimensions see diagram Filling machine models RVF736, 761 Portioning Speed up to 120 portions/min Portioning Accuracy +/- 1% Min. Product Size 60x100x20mm Max. Product Size 220x500x100mm Connected Loads 1kW, 3PH 10A pre-fused Compressed Air Connection 7 bar Compressed Air Requirement 1.5m2/hour Weight (not including filler) 200kg Paper Specifications: Max Outer Roll Diameter 300mm Max Inner Roll Diameter 70mm Max Outer Roll Diameter 25mm Max Roll Width 240mm Can also be used without board reel
Minced Meat Portion Line - PM150 & MWK32-80 Mixer Grinder
For MWK32-80 Mixer Grinder specifications click here. PM 150 Portioner: Portioner External Dimensions (WxDxH) see diagram Portioner Portioning Length 60-280mm Portioner Portioning Weight 200-1500g Portioner Power 0.25kW
Mixer Grinder External Dimensions (WxDxH) see diagrams Mixer Grinder Hopper Capacity 220ltr / 440lb Mixer Grinder Throughput (dependant on product) 3000kg/h Mixer Grinder Main Drive Motor 15kW Mixer Grinder Feeding Worm Motor 1.5kW Mixer Grinder Weight 950kg
Mixer Grinder External Dimensions (WxDxH) see diagrams Mixer Grinder Hopper Capacity 220ltr / 440lb Mixer Grinder Throughput (dependant on product) 3750kg/h Mixer Grinder Main Drive Motor 40HP (30kW) Mixer Grinder Feeding Worm Motor 2HP (1.5kW) Mixer Grinder Weight 1000kg
Mixer Grinder External Dimensions (WxDxH) see diagrams Mixer Grinder Hopper Capacity 120 Ltr / 240lb Mixer Grinder Throughput (@ 3mm) 2000kg/hr Mixer Grinder Main Drive Motor 10HP (7.5kW) Mixer Grinder Mixing Motor 1.5HP (1.1kW) Mixer Grinder Weight 520kg PLEASE NOTE: OUTLET PROTECTION GUARD IS REQUIRED FOR MINCING OVER 8mm
Mixer Grinder External Dimensions (WxDxH) see diagrams Mixer Grinder Hopper Capacity 200 Ltr / 400lb Mixer Grinder Throughput (@ 3mm) 2250kg/hr Mixer Grinder Main Drive Motor 24HP (18.5kW) Mixer Grinder Mixing Motor 2HP (1.5kW) Mixer Grinder Weight 825-925kg
Mixer Grinder External Dimensions (WxDxH) see diagrams Mixer Grinder Hopper Capacity 330 Ltr / 660lb Mixer Grinder Throughput (@ 3mm) 2750kg/hr Mixer Grinder Main Drive Motor 24HP (18.5kW) Mixer Grinder Mixing Motor 2HP (1.5kW) Mixer Grinder Weight 1375-1475kg
External Dimensions (WxDxH) 635x879x1190mm Hopper Capacity 45Ltr/20-60lbs Throughput 950kg/h Main Drive Motor 4HP (3kW) Mixing Motor 0.5HP (0.37kW) Weight 260kg
Mixer Grinder External Dimensions (WxDxH) see diagram Mixer Grinder Hopper Capacity 80ltr / 130-160lb Mixer Grinder Throughput (@3mm) 1300kg/hr Mixer Grinder Main Drive Motor 4 or 5.5kW (5.4 or 7.4HP) Mixer Grinder Mixing Motor 0.75kW (1HP) Mixer Grinder Weight 420kg
MS-1000 Industrial Brine Mixer - 1000 litre
External Dimensions (WxDxH) 1050x1380x1850mm Capacity 250 litres Weight 140kg Options available: Full control of set water quantity Full control of solution temperature Touch screen control panel The Nowicki MS-1000 Industrial Brine Mixer is a high-capacity brine preparation machine designed to produce consistent brine solutions for meat, poultry and fish processing. Featuring a 1,000-litre stainless steel mixing tank, the MS-1000 uses a triple mixing system combining mechanical agitation, liquid circulation and injection mixing to dissolve and distribute dry ingredients efficiently. An integrated centrifugal pump supports brine circulation and allows prepared solutions to be transferred to suitable downstream equipment. Manufactured by Metalbud Nowicki, the MS-1000 is ideal for food manufacturers requiring reliable, large-volume brine preparation for industrial injection and curing operations.
MS-250 Industrial Brine Mixer - 250 Litre
External Dimensions (WxDxH) 1050x1380x1850mm Capacity 250 litres Weight 140kg Options available: Full control of set water quantity Full control of solution temperature Touch screen control panel The Nowicki MS-250 Brine Mixer is a compact industrial brine preparation machine designed for producing consistent brine solutions for meat, poultry and fish processing. Featuring a 250-litre stainless steel mixing tank, the MS-250 combines mechanical agitation and pumped circulation to help dissolve and distribute dry ingredients efficiently. Its centrifugal pump supports consistent brine mixing, while the machine's compact design makes it particularly suitable for smaller meat processing operations. Manufactured by Metalbud Nowicki, the MS-250 provides a practical solution for preparing brine used in bacon, ham, poultry and other meat injection applications.
MS-400 Industrial Brine Mixer - 400 Litre
External Dimensions (WxDxH) 1150x1380x1930mm Capacity 400 litres Weight 180kg Options available: Full control of set water quantity Full control of solution temperature Touch screen control panel The Nowicki MS-400 Brine Mixer is a 400-litre industrial brine preparation machine designed for producing consistent brine solutions for meat, poultry and fish processing. Featuring a triple mixing system combining mechanical agitation, liquid circulation and injection mixing, the MS-400 efficiently dissolves and distributes dry ingredients, helping produce a uniform brine solution with minimal deposits. Manufactured from AISI 304 stainless steel, the machine incorporates a centrifugal circulation pump, semi-automatic dry ingredient dosing and the ability to transfer prepared brine to suitable downstream equipment. Ideal for bacon, ham, poultry and prepared meat manufacturers, the Nowicki MS-400 provides a practical and reliable solution for commercial brine preparation.
PE160 Automatic Burger Paper Interleaving Machine
External Dimensions (wxdxh) see diagram Throughput 120 units/min (working with paper of 100mm length) Dispensable Material absorbant paper, wax paper, cellophane Paper Roll Max Inner Diameter 76mm Paper Roll Max Outer Diameter 250mm Electrics 1ph 230V 50Hz Other products required Compressed air (6 bar, clean & dry air), router VPN for remote connection Options Stacking kit, Ethernet Kit Integrated Burger Forming & Paper Interleaving System Combining a REX vacuum filler, UFM300-5 burger forming machine and Veserkal PE160 paper interleaver creates an efficient, automated burger production line. The REX vacuum filler accurately portions the meat mixture, which is then shaped into consistent, handmade-style burgers by the UFM300-5. The Veserkal PE160 automatically places separator paper beneath each burger, preparing them for packaging or further handling. This integrated system helps reduce manual handling, improve portion consistency and increase production efficiency, with an optional automatic stacking unit available for further automation. Call our sales dept for more info on this line.
Poly Top Cutting Table - 4ft by 2ft (120x60cm)
External dimensions 25mm thick top on stand (WxDxH) 1200x600x900mm External dimensions 50mm thick top on stand (WxDxH) 1200x600x925mm Construction PEX500 Construction of stand aluminium NB. PLEASE CALL US IF YOU NEED TO PURCHASE THE POLY TOP ON ITS OWN WITHOUT THE STAND
Poly Top Cutting Table - 5ft by 2ft (150x60cm)
External dimensions 25mm thick top on stand (WxDxH) 1500x600x900mm External dimensions 50mm thick top on stand (WxDxH) 1500x600x925mm Construction PEX500 Construction of stand aluminium NB. PLEASE CALL US IF YOU NEED TO PURCHASE THE POLY TOP ON ITS OWN
Poly Top Cutting Table - 6ft by 2ft (180x60cm)
External dimensions 25mm thick top on stand (WxDxH) 1800x600x900mm External dimensions 50mm thick top on stand (WxDxH) 1800x600x925mm Construction PEX500 Construction of stand aluminium NB. PLEASE CALL US IF YOU NEED TO PURCHASE THE POLY TOP ON ITS OWN
R15 Vertical Cutter Mixer / Bowl Cutter
External Dimensions (WxDxH) 436x660x678mm Number of meals 50-250 covers Quantity Processed per Operation 3-9kg Bowl Capacity 15 litre Power 3000W Electric Supply 3ph 400V/50/3 Speed Dual (1500 & 3000rpm) Variable (300 to 3500rpm) Blades 3 Weight 49kg
R20 Vertical Cutter Mixer / Bowl Cutter
External Dimensions (WxDxH) 436x662x763mm Number of meals 50-300 covers Quantity Processed per Operation 3-12kg Bowl Capacity 20 litre Power 4400W Electric Supply 3ph 400V/50/3 Speed Dual (1500 & 3000rpm) Variable (300 to 3500rpm) Blades 3 Weight 75kg
R2200 Automatic Burger Forming Machine
External Dimensions (WxDxH) 775x600x625mm Throughput 2200/hr (variable) Power 0.55kW (1 phase) Hopper 20 litre Weight 75kg
R2200 Automatic Meatball Machine
External Dimensions (WxDxH) 775x600x625mm Throughput 4400/hr (variable) Meatball Size 35mm diameter with 34mm depth Power 0.55kW (1 phase) Hopper 20 litre (options to increase size) Weight 75kg Looking for a perfectly round meatball? Then add the MDB Meatball Rounder!
R2200/180 Automatic Burger Forming Machine
External Dimensions (WxDxH) 780x600x640mm Throughput 4400 single forms per/hr (variable speed) or 8800 double forms ( max diameter 50mm for double) Power 0.55kW (1 phase) Hopper 45 litre Conveyor belt extended to 750mm long Automatic wire clean as standard. Weight 95kg The R2200-180 benefits from a twin paddle / empties quicker / thus the product in hopper is worked less. N.B Compressed air required to run this machine, this is used for the auto wire cleaning mechanism
R30 Vertical Cutter Mixer / Bowl Cutter
External Dimensions (WxDxH) 720x600x1250mm Number of meals 100-500 covers Quantity Processed per Operation 4-17kg Bowl Capacity 28 litre Power 5400W Electric Supply 3ph 400V/50/3 20AMP Speed Dual (1500 & 3000rpm) Variable (300 to 3500rpm) Blades 3 Weight 110kg
R4000/180 Automatic Burger Forming Machine
External Dimensions (WxDxH) 780x600x640mm Throughput 8000/hr (variable) Power 1.1kW (1 phase) Hopper 45 litre goose neck Conveyor Belt Length 750mm Weight 100kg Fitted Options Auto wire clean N.B Compressed air required to run this machine, this is used for the auto wire cleaning mechanism
R45 Vertical Cutter Mixer / Bowl Cutter
External Dimensions (WxDxH) 760x600x1400mm Number of meals 200-1000 covers Quantity Processed per Operation 6-27kg Bowl Capacity 45 litre Power 10000W Electric Supply 3ph 400V/50/3 20AMP Speed Dual (1500 & 3000rpm) Variable (300 to 3500rpm) Blades 3 Weight 138kg
External dimensions see diagram Compatible vacuum fillers RVF300-900 series Throughput up to 120 burgers/min Product Size 60-125mm diameter Product depth 8-25mm Water Spray included Compressed air connection min. 6 bar, 120 l/min Power rating 400V/50Hz/0.7kW Net weight 70kg Other required products Vacuum filler, compressed air
S2000/180 Automatic Burger Forming & Stacking Machine
External Dimensions (WxDxH) 780x795x710mm Throughput 4000/hr (variable) Power 1.1kW (1 phase) Hopper 45 litre Max diameter 135mm 6 burgers stacked - thickness of burger no more than 15mm each 5 burgers stacked - thickness of burger no more than 20mm each 4 burgers stacked - thickness of burger no more than 24mm each Overall total stacking height is Approx 100mm. N.B Compressed air required to run this machine, this is used for the auto wire cleaning mechanism
SA150 Manual Burger Press (150mm)
Ext. Dims in open position (WxDxH) 380x460x360 Burger Size 150mm (6") Burger Press Weight 6.5kg ONLY ONE UNIT LEFT - VERY SPECIAL PRICING!
Sausage Cutter External Dimensions (WxDxH) 570x510x240mm Sausage Lengths 100,120,140,160,180mm Lengths of pieces for the special L80 160,180,200,240,280mm Diameter of sausage from 10 to 35mm Sausage Cutter Weight 10kg NIPS AND CUTS FRESH SAUSAGES TO A SET LENGTH
Sausage Cutting Machine - RSS70 Yr.2025
Factory refurbished REX RSS70 from 2025. Cutting system RSS70 Model 2025 transport unit standard front and rear air cooling transport belt sensor cleaning unit complete overhaul 6 months warranty on parts (excludes wear items) Call now to reserve, this machine will take approx. 4 weeks at REX then 7-10 days delivery into ourselves.
Sausage Cutting Machine - RSS70 Yr.2025
Factory refubished REX RSS70 from 2026. Cutting system RSS 70 model 2025 transport unit air cooling transport belt sensor cleaning unit complete overhaul 6 months warranty on spare parts, except wear parts Call to reserve this machine, approx 2 weeks at REX factory being refurbished then 7-10 days delivery to ourselves.
External Dimensions (WxDxH) 57x47x115cm Bowl Volume 14 litre Meat Capacity +/- 12kg Nozzles 3 x stainless steel of 14, 20 & 30mm as standard Motor 1.0HP (1 phase) or 0.75HP (3 phase) Hydraulic Oil Reserve 10 litre Construction stainless steel Lid & Piston Construction stainless steel Weight 120kg
External Dimensions (WxDxH) see diagram Bowl Volume 25 litre Meat Capacity +/- 22kg Nozzles 3 x stainless steel of 14, 20 & 30mm as standard Motor 1.75HP (1 phase) or 1.5HP (3 phase) Construction stainless steel Lid & Piston Construction stainless steel Weight 140kg
External Dimensions (WxDxH) 57x53x115cm Bowl Volume 35 litre Meat Capacity +/-30kg Nozzles 3 x stainless steel of 14, 20 & 30mm as standard Motor 1.75HP (1 phase) or 1.5HP (3 phase) Construction stainless steel Lid & Piston Construction stainless steel Weight 160kg MODEL SHOWN IN PHOTO - F25S
External Dimensions (WxDxH) see diagram Bowl Volume 30 litres Meat Capacity 60 lb Portioning Speed 350/min Sausage Skin Type Natural or artificial Head Type Portioning, twisting, linking Weight 400kg
Strip Cutter External Dimensions (WxDxH) 500x770x720mm Strip Cutter Weight 85kg Stand External Dimensions (WxDxH) 400x700x515mm Stand Weight 12kg Strip Cutter Motor 1.5kW Strip Cutter Throughput (slicing once) 1500 kg/h Strip Cutter Throughput (slicing twice into strips) 500 kg/h Strip cutter and stand construction stainless steel
External Dimensions 1920 x 925 x 1420mm Slices per minute 300 (single blade) 600 (double blade) Slice Thickness 0.5 - 700mm Cross Section 250x240mm Max Input Length 700mm Electrics 3PH 400V 50Hz 5.8kW
External Dimensions 1860 x 800 x 1340mm Slices per minute 220 (single blade) 440 (double blade) Slice Thickness 1 - 750mm Cross Section 210x230mm Max Input Length 760mm (1000mm optional) Electrics 3PH 400V 50Hz 2.7kW
External Dimensions 1845 x 830 x 1230mm Slices per minute 220 (single blade) 440 (double blade) Slice Thickness 1 - 32mm Cross Section 210x230mm Max Input Length 750mm (1000mm optional) Electrics 3PH 400V 50Hz 2.7kW
External Dimensions (WxDxH) see diagram Installation Suitable work surface Blade Length 1740mm Blade Speed 17m/s Blade Wheel Type Aluminium with single rim Blade Wheel Diameter 220mm Max Cutting Height 220mm Max Cutting Thickness 195mm Motor 1.5 HP Electrics 1ph 13AMP Construction stainless steel Weight 73kg N.B. THIS MACHINE IS NOT TO BE USED MORE THAN 30 MINUTES AT ONE TIME IF YOU ARE CUTTING COWS FEET PLEASE CALL US!
External Dimensions (WxDxH) see diagram Installation Suitable work surface Blade Length 1985mm Blade Speed 19 m/s Blade Wheel Type Aluminium with single rim Blade Wheel Diameter 250mm Max Cutting Height 270mm Max Cutting Thickness 225mm Motor 1.5 HP Electrics 1 phase 13AMP Construction stainless steel Weight 85kg N.B. THIS MACHINE IS NOT TO BE USED MORE THAN 30 MINUTES AT ONE TIME IF YOU ARE CUTTING COWS FEET PLEASE CALL US!
ST270-P Table Top Meat Bandsaw with Pedestal
External Dimensions (WxDxH) see diagram Installation Table top machine bolted to a pedestal Blade Length 1985mm Blade Speed 19m/s Blade Wheel Type Aluminium with single rim Blade Wheel Diameter 250mm Max Cutting height 270mm Max Cutting width 225mm Motor 1.5HP Electrics 1ph 13AMP Construction stainless steel Weight 131kg N.B. THIS MACHINE IS NOT TO BE USED MORE THAN 30 MINUTES AT ONE TIME IF YOU ARE CUTTING COWS FEET PLEASE CALL US!
External Dimensions (WxDxH) see diagram Installation Bolted to pedestal Blade Length 2340mm Blade Speed 23 m/s Blade Wheel Type Aluminium with single rim Blade Wheel Diameter 300mm Max Cutting Height 320mm Max Cutting Thickness 275mm Motor 2 HP Electrics 1 phase 13AMP or 3 phase 16AMP Construction stainless steel Weight 97kg N.B. THE 1ph VERSION OF THIS MACHINE IS NOT TO BE USED MORE THAN 30 MINUTES AT ONE TIME IF YOU ARE CUTTING COWS FEET PLEASE CALL US!
ST320-P Table Top Meat Bandsaw with Pedestal
External Dimensions (WxDxH) see diagram Installation Bolted to pedestal Blade Length 2340mm Blade Speed 23 m/s Blade Wheel Type Aluminium with single rim Blade Wheel Diameter 300mm Max Cutting Height 320mm Max Cutting Thickness 275mm Motor 2 HP Electrics 1 phase 13AMP or 3 phase 16AMP Construction stainless steel Weight 97kg N.B. THE 1ph VERSION OF THIS MACHINE IS NOT TO BE USED MORE THAN 30 MINUTES AT ONE TIME IF YOU ARE CUTTING COWS FEET PLEASE CALL US!
STL350 Floor Standing Meat Bandsaw - Fixed Table
External Dimensions (WxDxH) 745x790x1670mm Blade Length 2500mm Blade Speed 23 m/s Blade Wheel Type Stainless steel with double rim Blade Wheel Diameter 300mm Max Cutting Height 350mm Max Cutting Thickness 275mm Motor 3 HP (3 phase / 1 phase) Electrics 1ph 16AMP or 3ph 16AMP Construction stainless steel Weight 170kg PLEASE NOTE: Right sided version is kept in stock, if you need left sided then this will need to be ordered for you.
STL350 Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 2500mm Blade Speed 23 m/s Blade Wheel Type Stainless steel with double rim Blade Wheel Diameter 300mm Max Cutting Height 350mm Max Cutting Thickness 275mm Motor 3 HP (3 phase / 1 phase) Electrics 1ph 16AMP or 3ph 16AMP Construction stainless steel Weight 170kg
STL390 Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 2910mm Blade Speed 28 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 360mm Max Cutting Height 400mm Max Cutting Thickness 335mm Motor 3.5HP (1ph) or 4HP (3ph) Electrics 1ph 16AMP or 3 phase 16AMP Construction stainless steel Weight 205kg
STL430 Floor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 3155mm Blade Speed 31 m/s Blade wheel Type stainless steel with double rim Blade Wheel Diameter 400mm Max Cutting Height 420mm Max Cutting Thickness 375mm Motor 4HP Electrics 3 phase 16AMP Construction stainless steel Weight 220kg
STL480 FLoor Standing Meat Bandsaw - Sliding Table
External Dimensions (WxDxH) see diagram Blade Length 3500mm Blade Speed 31 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 450mm Max Cutting Height 480mm Max Cutting Thickness 425mm Motor 5.5HP Electrics 3 phase 16AMP Construction stainless steel Weight 250kg
STL600 Floor Standing Meat Bandsaw - Fixed or Roller Table
External Dimensions (WxDxH) see diagram Blade Length 3715mm Blade Speed 32 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 700mm Max Cutting Height 550mm Max Cutting Thickness 700mm Motor 5.5 HP Electrics 3 phase Construction stainless steel Weight 460kg
STL800 FLoor Standing Meat Bandsaw - Fixed or Roller Table
External Dimensions (WxDxH) see diagram Blade Length 4440mm Blade Speed 32 m/s Blade Wheel Type stainless steel with double rim Blade Wheel Diameter 400mm Max Cutting Height 600mm Max Cutting Thickness 800mm Motor 5.5 HP Electrics 3 phase Construction stainless steel Weight 550kg
External Dimensions (WxDxH) 410x610x580mm Electric Supply 1ph 13amp standard plug or 3ph Throughput 750kg/h Motor 2.25kW 3HP Weight 80kg Material of body st/st Material of head st/st The Medoc TM32 Tabletop Meat Mincer is a heavy-duty commercial meat mincing machine designed for butchers, meat processors and food manufacturers requiring reliable, high-capacity mincing. Featuring a powerful 3HP (2.25kW) motor, size 32 cutting system and wide feed throat, the TM32 offers a rated throughput of up to 750kg per hour, depending on the product and mincing plate. Manufactured in Spain, the machine features a stainless steel body, mincing head and large feed pan, with rounded corners for improved hygiene. The removable mincing head, worm and retaining ring allow straightforward cleaning, while the machine is supplied with a 4.5mm mincing plate, four-bladed knife and meat pusher. Available with single-phase or three-phase electrical supply, the Medoc TM32 combines industrial mincing performance with a practical tabletop design.
Buy 4 or more tote bins for special price of £345 + VAT each. If you require a smaller quantity, please contact us so we can calculate shipping costs. 200 litre capacity Manufactured from durable 304 grade stainless steel Heavy-duty 5mm thick base for increased strength and longevity Seam-welded hygienic construction Smooth, easy-to-clean stainless steel surfaces Excellent corrosion resistance Choice of blue or white wheels Designed for frequent use in demanding industrial environments Ideal for food processing, meat processing, bakeries, pharmaceutical and manufacturing applications Robust, manoeuvrable and built for long service life
UFM300-5 Automatic Burger Forming Machine
External Dimensions see diagrams Portions per minute Up to max 150 (depending on size) Burger Sizes 50 to 100mm (fixed) in 10mm increments Conveyor Belt Size 1260 x 320mm Supply Voltage 230V + PE Compressed Air Consumption 2m3h, 6 bar Water Consumption 0.5l/min Net Weight 260kg Optional Extras Texture roller, UV sterilisation, adapter to attached to other brand vacuum filler Other required products Vacuum filler, compressed air
UFM300-6 Automatic Burger & Meatball Forming Machine
External Dimensions see diagrams Portions per minute Up to Max.150 (depending on size) Burger Sizes 50 to 100mm (fixed) in 10mm increments Meatball Sizes 20 to 60mm (fixed) Conveyor Belt Size 1260 x 320mm Supply Voltage 230V + PE Compressed Air Consumption 2m3h, 6 bar Water Consumption 0.5l/min, only drinking water Net Weight 260kg Optional Extras Texture roller, UV sterilisation, adapter to attached to other brand vacuum filler Other Products Required Vacuum filler, compressed air
External Dimensions (WxDxH) see diagram Filling Capacity 2700kg/h Hopper Size 100 litre Servo twisting motor No Filling Pressure 40 bar Portioning Speed 300/min (@40g) Portioning weight 1-99,999grams Weight 450kg
Vacuum Filler - RVF327 Portion Only
SAVE OVER £7K! Buy this Ex demo REX RVF327 vacuum filler. (Used for in-house demonstrations only) This machine is portion only, so ideal for customers wanting to straight fill with extreme portion accuracy. The machine is fitted as standard with clipper socket which allows the driving of various clipping devices or additional machines. Touch screen display guarantees simple operation, with 300 portions per minute. The machine is ideal for petfood production. Call us now for more information.
Vacuum Filler - RVF327 Yr.2026
Factory refurbished REX RVF327 from 2026. Vacuum filling machine with filling, portioning and twisting of sausages. Model 2026 100 litre hopper casing holding device 400 accessories complete overhaul in REX's factory 6 months warranty of spare parts (except wear parts) Call to reserve this machine, approx 5 weeks at REX factory being refurbished then 7-10 days delivery to ourselves.
External Dimensions (WxDxH) see diagram Filling Capacity 2700kg/h Hopper Size 100 litre Servo twisting motor Yes Filling Pressure 40 bar Portioning Speed 300/min (@40g) Portioning weight 1-99,999grams Weight 450kg
External Dimensions (WxDxH) see diagram Filling Capacity 3000kg/h Hopper Size 100 litre Servo twisting motor Yes Filling Pressure 45 bar Portioning Speed 350/min (@40g) Portioning weight 1-99,999grams Weight 500kg
External Dimensions (WxDxH) see diagram Filling Capacity 2000kg/h Hopper Size 250 litre Servo twisting motor No Filling Pressure 40 bar Portioning Speed 500/min (@40g) Portioning weight 5-99,999grams Weight 1250kg NB. Image shows RVF420 attached to a clipper, clipper is not incuded in the pricing.
External Dimensions (WxDxH) see diagram Filling Capacity 3000kg/h Hopper Size 160 litre Servo twisting motor Yes Filling Pressure 45 bar Portioning Speed 450/min (@40g) Portioning weight 1-99,999grams Weight 1200kg
External Dimensions (WxDxH) see diagram Filling Capacity 3600kg/h Hopper Size 250 litre Servo twisting motor Yes Filling Pressure 45 bar Portioning Speed 450/min (@40g) Portioning weight 1-99,999grams Weight 1200kg
External Dimensions (WxDxH) see diagram Filling Capacity 3600, 4000, 6000, 6100kg/h (dependant on model) Hopper Size 250, 350 litre (optional) Servo twisting motor Yes Filling Pressure 45, 70 bar (dependant on model) Portioning Speed 450, 650/min (@40g) (dependant on model) Portioning weight 1-99,999grams Weight 1400kg
Factory refurbished REX RVF760 from 2010. Vacuum filling machine with filling, portioning. Model 2010 350 litre hopper lifting device for 200 litre tote bins 16 vanes rotor accessories 1 x additional clipping socket complete overhaul in REX's factory 6 months warranty of spare parts (except wear parts) Call to reserve this machine, approx 8 weeks at REX factory being refurbished then 7-10 days delivery to ourselves.
External Dimensions (WxDxH) see diagram Filling Capacity 11000, 13000 kg/h (dependant on model) Hopper Size 350 litre (optional) Servo twisting motor Yes Filling Pressure 35, 45 bar (dependant on model) Portioning Speed 700/min (@40g) (dependant on model) Portioning weight 1-99,999grams Weight 1500kg
External Dimensions (WxDxH) 1320x2660x1700mm Capacity 1000 Litres (500kg) Drum Speed 0-12rpm Power 2.3kW Weight 640kg
Vacuum Tumbler - MA 1000 PSCH with cooling
External Dimensions (WxDxH) 1330x2660x1700mm Capacity 1000 Litres (500kg) Drum Speed 0-12rpm Power 2.7kW Weight 770kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
External Dimensions (WxDxH) 2220x4890x2480mm Capacity 10000 Litres (5000kg) Drum Speed 0-5rpm Power 10.4kW Weight 3600kg
Vacuum Tumbler - MA 10000 PSCH with cooling
External Dimensions (WxDxH) 2220x4890x2480mm Capacity 10000 Litres (5000kg) Drum Speed 0-5rpm Power 11.2kW Weight 4300kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
External Dimensions (WxDxH) 1390x2760x1940mm Capacity 1500 litre (750kg) Drum Speed 0-8rpm Power 3.4kW Weight 1050kg
Vacuum Tumbler - MA 1500 PSCH with cooling
External Dimensions (WxDxH) 1420x2760x1940mm Capacity 1500 Litre (750kg) Drum Speed 0-8rpm Power 3.8kW Weight 1350kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
External Dimensions (WxDxH) 1180x1700x1540mm Capacity 200 litres (120kg) Power 1.6kW Weight 370kg
Vacuum Tumbler - MA 2800 PSCH with cooling
External Dimensions (WxDxH) 1635x3400x1970mm Capacity 2800 Litre (1400kg) Drum Speed 0-10rpm Power 6.0kW Weight 2200kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
Vacuum Tumbler - MA 3600 PSCH with cooling
External Dimensions (WxDxH) 1790x3710x2050mm Capacity 3600 Litre (1800kg) Drum Speed 0-7rpm Power 5.4kW Weight 2550kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
External Dimensions (WxHxD) 1270x2100x1700mm Capacity 500 litres (250kg) Drum Speed 0-15 rpm Power 2.3kW Weight 450kg
Vacuum Tumbler - MA 500 PSCH with cooling
External Dimensions (WxDxH) 1300x2100x1700mm Capacity 500 Litres (250kg) Drum Speed 0-14rpm Power 2.7kW Weight 640kg Benefits of integrated cooling in a meat tumbler: Costs of cooling a whole room uses a massive amount of kW/h compared to a tumbler that has cooling directly in the jacket Efficiency of a tumbler in a fridge / cooled room, is much lower than a tumbler with cooling directly in the jacket - during the cycle meat generates heat and in order to keep the temp down, you have to pause (typically 10min turn, 5 min pause). In a machine with cooling the drum is much colder so the product temp stays low and you can eliminate the pause. This means that daily production on a cooling machine is equivalent to a none cooling machine with a much higher capacity. This depends on cycle time, but a 2000 litre cooling tumbler might be equivalent to a 3000 litre tumbler without cooling. Placing a non-cooling tumbler in a fridge creates more reliability issues. Vacuum pumps dont like the cold, particularly when first starting up. Electrics like control panel can have more issues with condensation etc.
External Dimensions (WxDxH) 345x330x590mm Power 500 Watts Voltage 1ph 230V Speed 500rpm Feed Hoppers Half moon hopper, 2 x cylindrical hoppers (58mm & 39mm dia.), exactitube pusher included Lid & Bowl Composite lid & stainless steel bowl Motor Base metal D-Clean Kit Included Discs Not included Weight 15.2kg Optional Disc Pack 6 discs - 2mm & 4mm slicers, 2mm grater, 4x4mm julienne, 10x10x10 dice set Other Discs 28 different discs with various sizes are available on request (call for pricing)
External Dimensions (WxDxH) 390x340x610mm Power 550 watts (1 speed) 600 watts (2-speed) Voltage 1-phase 230V, 3-phase 400V Speed 375rpm (1-speed), 375 & 750rpm (2-speed) Feed Hoppers Half moon 2.2 litre, 2 x cylindrical hoppers (58&39mm), exactitube pusher Lid & Bowl metal Motor Base polycarbonate D-Clean kit Included Discs Included 2mm slicer, 5mm slicer, 2mm grater, 10x10mm dicer Weight 19.8kg Optional Disc Pack 8 discs - 2 & 5mm slicers, 2mm grater, 3x3mm julienne, 10x10x10 dicing set, 10x10x10mm french fries set Other Discs up to 50 discs available with different shapes and sizes (call for pricing) Other Options Mashed potato accessory (call for pricing)
External Dimensions (WxDxH) 390x340x610mm Power 550 watts (1 speed) 600 watts (2-speed) Voltage 1-phase 230V, 3-phase 400V Speed 375rpm (1-speed), 375 & 750rpm (2-speed) Feed Hoppers Half moon 2.2 litre, 2 x cylindrical hoppers (58 & 39mm dia.), exactitube pusher Lid & Bowl metal Motor Base stainless steel D-Clean Kit Included Disc Included 2mm slicer, 5mm slicer, 2mm grater, 10x10mm dicer. Weight 20.2kg Optional Disc Pack 8 discs - 2 & 5mm slicers, 2mm grater, 3x3mm julienne, 10x10x10 dicing set, 10x10x10mm french fries set Other Discs up to 50 discs available with different shapes and sizes (call for pricing) Other Options Mashed potato accessory (call for pricing)
Veg Prep Machine - CL55 Pusher feed head
External Dimensions (WxDxH) 865x396x1272mm with stand Power 1100 watts Voltage 1-phase 230V, 3-phase 400V Speed 375rpm (1-speed), 375 & 750rpm (2-speed) Feed-Heads Full moon pusher feed head 4.4 litre, 2 x cylindrical hoppers (58&39mm dia.) exactitibe pusher Lid & Bowl metal Motor Base stainless steel Stand stainless steel with castors and brake Accessories Motor shaft brush Discs Not included Weight 62kg Optional Disc Pack 8 discs - 2 & 5mm slicers, 2mm grater, 3x3mm julienne, 10x10x10 dicing set, 10x10x10mm french fries set Other Discs up to 50 discs available with different shapes and sizes (call for pricing) Other Options Mashed potato accessory (call for pricing)
Veg Prep Machine - CL55 Workstation
External Dimensions (WxDxH) 865x396x1272mm with stand Power 1100 watts Voltage 1-phase 230V, 3-phase 400V Speed 375rpm (1-speed), 375 & 750rpm (2-speed) Feed-Heads Stainless steel auto feed tube, full moon pusher feed head 4.4 litre, 2 x cylindrical hoppers (58&39mm dia.), exactitube pusher Lid & Bowl metal Motor Base stainless steel Stand stainless steel with castors and brake Accessories Stainless steel mobile stand, adjustable trolley GN1x1, 3 heights + 3 GN1x1 pans, 3mm mashed potato equipment, motor shaft brush D-Clean Kit Included Discs Included 16 discs - 1, 2, 4mm slicers, 1.5, 3mm grater, 2.5x2.5, 2x10, 4x4mm julienne, 5x5x5, 10x10x10, 20x20x20mm dicing set, 10x10x10mm french fries set Weight 62kg Other Discs up to 50 discs available with different shapes and sizes (call for pricing) Other Options four holes hopper, straight & bias cut hole hopper, potato masher